Fresh Memberships:
Robot Study Circle invites everyone for its Inaugural function ..
Venue : Room No -13 (Mechanical Department)
Date : 27th AUGUST 2008
Time : 5 : 00 pm
Students who are interested to be member of RSC should register at inauguration.
Candidates interested in joining RSC should submit-
Membership Fees :-
COEP Students : Rs 150
Other Students : Rs 200
& an I-Card size Photo
( Limited Registrations !!! )
Fresh applications will be considered for following types
|
Level I: (Beginners) – Everyone-Without any knowledge of robotics
Level II (Intermediate) – Introductory knowledge of robotics & Electronics.
Level III (Advanced) – Prize Winners of robotics competitions & Active members of Last Year. |
Members :
Details of Memberships (2006-07): There were in-all 230 members. 200 from COEP & 30 from other colleges.(Limited Seats)
Details of Memberships ( 2007-08 ) : 300 members registered at the time of inauguration, out of which 250 were from COEP and 50 from other colleges.
For more details click here.
Or Email at – info[at]coeprobotics[dot]org
For more Information :
Contact : Sumit More ( 94235 77305)
BENEFITS OF MEMBERSHIP
1.Each Member will get an I-Card, CD and Certificate
2. Concession for Workshops conducted by RSC.
3.Guidence from experts for different robotic projects.
4.Can use our Library & Assets.
5.Can participate in various activities conducted by RSC such as Industrial Visits.
6.Total Funding for the special members who represent RSC in well-known competitions.…. and many more
IEEE-jamia student branch proudly presents ENCOMIUM’07-An Asia Level
Technical festival on 18th,19th august.
ENCEPHALIA – The robotics challenge
DARE TO SHOOT………
OBJECT
The contest aims at encouraging the participants to design robots that
can dexterously pick and shoot balls into a basket.
FIELD OF PLAY
The dimensions of the playing field are 180 × 150 cm. One side of the
field contains a basket. The opposite side is the empty side.
Two three point circles are drawn at radius 40 cm and 80 cm.
The innermost circle is region A, followed by region B and region C.
THE BALL AND THE BASKET
The ball is a standard table tennis ball. The ball will be placed in
the region C randomly.
The basket will be a cylinder with a diameter of approximately 11 cm
and height approximately 14 cm. The top rim of the basket is mounted at a
height of 40 cm and the basket is supported on a rectangular cardboard
of dimensions 20 × 60 cm.
ROBOT
The robot and the moving part when fully opened shouldn’t be higher
than 35 cm
And the base should be less than 25 × 25 cm.
GAME PLAY
The three point cylinder is the volume described by the playing field
as the base and extruding the three point circle as sides.
A robot scores if the ball is thrown by the robot and ball enters the
basket.
A robot scores 20 points when the robot shoots the ball while lying in
region B when the ball is thrown (No part of robot being inside or
touching the space of the three point cylinder of region A).
A robot scores 40 points when the robot shoots the ball while lying in
region C when the ball is thrown (No part of robot being inside or
touching the space of the three point cylinder of region B).
Ball missing the basket will be kept back to its starting point.
Each team will be given 10 minutes and the team collecting maximum
points will be declared winner.
We are expecting a minimum of 20 teams from various engineering
colleges in india.
So sir we want your “Robot Study Circle” to be a part of our
event.
we also have various sponsership slots of which if you are interested,
we can mail the soft copies of them..
looking forward for your positive reply..
Thank You.
By: Ankur Rustagi on July 29, 2007
at 7:52 am
I wish I could join that site
By: Amr Mostafa on September 7, 2007
at 12:04 pm
sorry,but which site r u speaking about.. Please let us know clearly what you expect so that we could assist you accordingly.
By: RSC CO-ordinator on September 8, 2007
at 9:36 am
When is next rsc work shop?
What are the projects for this year?
By: Sabale Ashish on September 12, 2007
at 3:11 pm
We will have workshops very soon. The scheduling work is undertaken.. We have to complete manny norms.. Please keep checking our website for updates. We will regularly update the events. Thankyou for your patience..
By: RSC co-ordinator on September 12, 2007
at 3:21 pm
sir can i take the membership of this site
By: piyush on September 12, 2007
at 3:24 pm
Sorry this is not a online group. It is a group of students from Pune administered by COEP having enthu in robotics. If you are unterested you need to come to our college to join us.. in case any query plz use our forum
By: RSC co-ordinator on September 12, 2007
at 3:47 pm
Sir, I wish to learn about ATMEL and do some project related to this. Can you send me any link where i found all the neccessary information regarding to ATMEL. Also i wish to join this site but i dont know how could i plz tell me the information also.
By: Ravi Tiwari on September 17, 2007
at 5:47 pm
Sir, I wish to learn about ATMEL and do some project related to this. Can you send me any link where i found all the neccessary information regarding to ATMEL.
By: Ravi Tiwari on September 17, 2007
at 5:48 pm
hii
i have intrested in robotes .
i am engineering student from mechanical branch .
i want be member of this one.
By: swadesh on September 21, 2007
at 1:11 pm
Hello Ravi,
ATMEL has a wide range of controllers available. First of all decide which controller you wanna go with & rest is all you need to know about basic of any controller. Refer the datasheets & they will help you.
By: RSC co-ordinator on September 23, 2007
at 6:21 am
Sir,
Is RSC membership available to only students or even working professionals could have same?
As am very interested in Robotics and mechatronics, and wish to be a part of a active robotics group.
Please let me know the membership procedure for working professionals and the activities of the group.
By: sanjay gawade on November 21, 2007
at 11:38 am
sir,
please update the upcoming robotics workshop
By: swapnil adsure on February 9, 2008
at 6:43 am
sir
i am M.Sc(electronics) student. i have the experince to working with uc 8051,pic & avr.
i want to know how could i start my robotics study from basic.
shall i join your study circle online.
By: kirti on April 19, 2008
at 12:41 pm
sir,
I am from very backword city, which is in nandurbar Dist. I am interested in robotics,so can I know what should I do to learn robotics from basic ?
or is there any correspondance course to learn about robotics ,if any please tell me about that..
By: manasi pathak on June 29, 2008
at 8:09 am
When is next rsc work shop?
What are the projects for this year?
By: ADITI PATHAK on June 29, 2008
at 8:36 am
1. Sorry, we don’t have any correspondence course
2. About w/s n all, we ll be updating the schedule/details very soon.
By: RSC Web Co-ordinator on June 30, 2008
at 6:16 am
hey i will be joining COEP this year…
could i be the member of robot study circle??
By: mandar kashikar on July 3, 2008
at 6:01 am
yep.. u r most welcomed..
By: RSC Web Co-ordinator on July 5, 2008
at 1:24 pm
sir
it’s nice to have robo compettion in pune
but sir pease update the data required for compittion.
By: gade vijay on July 29, 2008
at 4:58 am
for updates do check the following link,
http://www.robotics.mind-spark.org
By: RSC Web Co-ordinator on August 3, 2008
at 6:47 am
sir, i want to ask whether ican join the robo club at coep,i hav tken a drop this year due to some reasons,i hav finished my 12th with 86%,so can i join and start from basic level this year or else join next year!
By: jai joshi on October 7, 2008
at 4:30 pm
I would like to know when will you conduct the next RSC workshop?
By: MAHALANKAR SUSHIL on October 9, 2008
at 12:17 pm
sir, i m studying in S.Y.INSTRU. in COEP. I want to join RSC group. how can i register now?
By: santosh ugale on October 19, 2008
at 8:36 am
sir, i want to ask whether ican join the robo club at coep,i hav tken a drop this year due to some reasons,i hav finished my 12th with 86%,so can i join and start from basic level this year or else join next year!
By: ganesh on December 2, 2008
at 6:56 am
Hello I am working in PARI Ltd. I want to join RSC group. how can i register now?
By: Mukesh on February 19, 2009
at 9:07 am
Hello I am working with PARI Ltd. I want to join RSC group. how can i register now?
By: Vaibhav on February 19, 2009
at 9:08 am
I had earlier communicated to RSC on 23 rd Jan. I have now begun learning basics of electronics and robotics. I am very keen on becoming a member of RSC. Please guide about the same. Regards.
By: Sunit Ashar on February 22, 2009
at 4:51 am
Dear Sir,
I am Khalid Tariq Al-Zaydi, 13 years old, member of the Saudi Robot Team who particiapte in the World Robot Shampionship 2008 in Japan, and I am very intersted in your magazine, club & info.
Please accept me a jonior member and give me a chance to be one of your group if possible!
I have gain alot of info. and I am very intrested in programing the robot.
Thanks you very much for reading my email and looking forward to be the jonior member!
Best regards,
Khalid Tariq Al – Zaydi
P.O. Box 10203
Jubail 31961
Kingdom of Saudi Arabia
Mobile# +966 531588999
By: Khalid Al Zaydi on March 1, 2009
at 11:04 pm
Hello,
I have just completed my diploma in E/TC.
I am intested in persuing a carrer in robotics.
I have particiapted in Robotics competitions in Pune.I have worked on both autonomous & manual robots and wish to join RSC.Kindly mail me the details for the membership.
Thank You.
By: shraddha on June 15, 2009
at 5:00 am