WORKSHOP ON INDUSTRIAL ROBOT PROGRAMMING :
Day: 29th & 30th Sept 2007
Time: 10:00 am
Venue: Production engineering Dept. COE,Pune
Registration: for RSC members only at RSC lab(Mr. Kadam)
First 40 Enteries per Day shall be considered.
Contents of this one day workshop are as below:
- Introduction to Robotics
- Introduction to Industrial Robots
1. Yasakava Corporation- Motoman Series Robot.
2. SCORBOT Robot.
- Demonstration of the robot programming.
- Practical on Programming for participants
———————————————————————————————————
WORKSHOP FOR 12th SCIENCE STUDENTS :
A workshop is to held for the students of 12th science. The advanced level members from RSC will teach them about robotics & concepts involved in autonomous robots. The team will consist of 3 members & each team will be provided by a kit of a uC-less(analog) moduled robot which they will assemble at workshop. The kit can be taken off by the respective teams after the workshop.
Features
- Each Member will have to pay Rs. 200 (i.e. 600/- per team).
- These students will be from selected colleges of Pune & each college is to provide 3 teams for workshop. So in-all there will be 45 students.
- Each team will also have their respective assistant during the workshop.
- This workshop will be held under Community Welfare Programs conducted by college.
Announcements :
- Each team should necessarily bring there own TESTER , DIGITAL MUTIMETER(DMM)SCREW DRIVER SET , a personal NOTEBOOK & I-Card. Rest of the materials & tools will be provided by RSC.
- The faculty co-ordinators from the respective colleges are requested to be present during innauguration ceremony.
- Lunch for all the participants & members concerned with this activity is arranged on BC.
- All the team should report at 9:00 am at Robot Study Circle Lab(besides main drawing hall) to Mr. Kadam for registration.
- We will update any changes made from time to time.
- Candidates should confirm their names from the list presented below.
Venue:
ROOM NO 13, Mechanical Engg. Department, COE,Pune.
* For any queries please contact the co-ordinators.
List of Colleges:
1) Laxmanrao Apate Jr.College,Pune
2) Abasaheb Garware College Karve Road, Pune
3) Fergusson College, Pune.
4) S.P.College, Pune
5) Modern College of Arts, Comm. & science, Pune
why is der a reservation in selection of candidates for 12th sci. workshop??/
is did da way u ppl wanna spread knowledge??
By: kiran on September 22, 2007
at 12:09 pm
sorry!!! We are not at all related with selection of candidates.. We have to just do our job.. the whole selection process is under the management of college & we need to follow some norms/policies of government college..
By: RSC co-ordinator on September 23, 2007
at 1:33 pm
Arre this workshop was like awesome!!!!
Seriously , u should conduct more workshops of this kind. i really wanna try makin other types of robots. Jus dat next time chek evry component
And the way u guys teach its not like teaching at all…………its funnnnn!!!!!!!
By: Kinnari on September 24, 2007
at 5:08 pm
Thanks so much! It was a great experience for all of us as well.
We will definitely keep you posted about the future workshops or events.
By: The Co-Ordinator on September 24, 2007
at 5:11 pm
The workshop was simply too gr8…i wish u’ll keep conducting these kinda workshops so dat we gat a chance 2 make new things again n again.
By: sourabh on September 25, 2007
at 11:16 am
I am member of robotics study circle.I am very interested in the robotic study. I missed workshop. I am F.Y.B.Tech[I.T.] student. I want attend all workshop conducted by you. Give me the informations about dates of workshop.
By: Vijaya More on October 20, 2007
at 1:07 pm
hai
i am rajinikantha.k i am studing ing b.e mechanicl engg .and i want to join that trainig .so pls tell what is the processer to join that trainig.
By: rajinikantha on May 15, 2008
at 6:05 am
hai
i am rajinikantha.k i am studing ing b.e mechanicl engg .and i want to join that trainig .so pls tell what is the processer to join that trainig.
I want attend all workshop conducted by you. Give me the informations about dates of workshop and place where it has been conducted.
By: rajinikantha on May 15, 2008
at 6:09 am
i am rjinikantha.k apperead in B.E Mech and i have interset in robtics flied and i want to be part of kuka trainig .i already applied two but i not got any replay.so pls replay
By: rajinikantha on May 23, 2008
at 7:33 am
hey,i wanna k9 abt robotic colleges in mum n pune. plz gv me ri8 info.thanks..
By: tejal waghmare on June 2, 2008
at 4:05 pm
d website is helpful n awesome 4 newcomers in dis field. plz give me d details of d next workshop n how can i join it? is dere any magzine or kit related 2 robocon using image processing n how i can get it?
By: amanya on June 13, 2008
at 5:27 pm
is there any book from while fresher can know about robo making?
By: sanhita on June 28, 2008
at 9:34 am
Is there any book from while fresher can know about robo making?
By: MANASIPATHAK on July 2, 2008
at 6:45 am
Dear Sir,
Annual Techno-Management cum Cultural Festival: SRIJAN ‘09 of the Indian School of Mines University, Dhanbad will unfold over three days from 19th to 21st March-2009, organised by the ISMU Students Society (ISS). The event is one of the largest youth festivals in the Eastern region of the country showcasing a plethora of events, and is expected to have 1000 participants from different institutions across India apart from over 2000 students of ISMU. Buoyed by the overwhelming success of SRIJAN 2K8, we plan to host the festival on a grander scale this year, making it an even greater success. This means a plethora of cultural and technical events: competitions, workshops, lecture series, entertainment shows et al.
Robotics is the one of the most important events of SRIJAN’09. It is expected to have more than 100 teams and 400 participants from different institutions in five various robotics events. Over the years, Robotics has witnessed participation from various colleges including different IITs and NITs.
We believe that your association with SRIJAN ’09, will provide an excellent opportunity to interact with young minds, who will be visiting the campus to showcase their talents apart from an excellent platform for academia-industry interactions.
We humbly look forward to your esteemed association as the “Event Title Sponsor” for “Robotics” of SRIJAN ‘09.
As our proud associate we expect the following:
Sponsorship of Rs.75,000
or
Provide Training to winners of our robotics events.
We promise to provide you with the following benefits:-
1. Your name and logo will be included in the notices, posters and other promotional material of Srijan’09, which is sent to over 300 colleges all over India.
2. The Srijan’09 Website will feature both the name and logo.
3. You can display banners at prominent locations during Srijan’09.
4. You can offer any prize, if you so desire.
We believe that your association with Srijan’09 will prove advantageous to you in the following ways:
1. As stated before, the event witnesses participation form large number of institutes of the across India, so will provide an excellent opportunity to market your brand.
2. The event brings together people from different institutes on a single platform, hence will provide a single-stop to interact with and to increase your reach to people from different spheres of life.
3. ISMU alone has over 2000 residential students that regularly send applications, transcripts etc all around the globe. Your association will definitely help in becoming the preferred courier service.
We humbly look forward to your esteemed association with SRIJAN’09.
Thanking You.
Regards,
Vijay Verma
(In-charge, Robotics Events, Srijan’09)
By: Vijay Verma on January 19, 2009
at 7:34 pm
Iwish to join a basic training prog. of Robotics. I am going to appear for XI. (Sci.) exam. in Mar 2009. Kindly guide me about the same. Regards.
By: Sunit Ashar on January 23, 2009
at 5:33 am
I had earlier communicated to RSC on 23 rd Jan. I have now begun learning basics of electronics and robotics. I am very keen on becoming a member of RSC. Pl. Regards. guide about the same. Regards.
By: Sunit Ashar on January 30, 2009
at 5:24 am
hi!! i really wud like to know wat this society is all about as im really interested in robotics..
By: swati on January 30, 2009
at 3:15 pm
heyy!!! there’s any scope for the 1st year diploma students in electronics …..??????…….
have immense interest plsss… guide me!!!!!!
thanking you.
By: Ninad Nanaware on April 6, 2009
at 2:45 pm
I m a production Engg student of Haldia Institute of Technology. My 4 th year project is on robotic gripper (has not finished yet).I am interested to do more projects. I want your assistance and want to do project.
By: Kunal Banerjee on July 14, 2009
at 9:36 am
Since many days their is no updation of website.
By: sandesh on July 31, 2009
at 8:21 am
HAI I AM THE STUDENT OF BCA. IF THERE ANY SCOPE FOR US TO JOIN ROBOTICS
By: arnab on September 14, 2009
at 1:33 am
Hello,
I am Anant working as event co-ordinator in RSC.
We’re really sorry about not updating website due to some system problem.
RSC is going to held inaug for 2009-10
very soon,so interested people can join.
We’ll be really happy to see all of you on inaug.
Just keep checking this blog and RSC site for news.
Thank you for visiting this page.
Any suggestion is welcomed.
By: Anant on September 26, 2009
at 1:58 pm